What cutters are available for this?

Answer

Aug 15, 2023 - 08:00 AM

We stock the following cutters for the Magic 70

Please note - when using End Mill Cutters there are a few things that need to be taken into consideration;

1. The tension xxxx must be fixed in the right hand side on the top of the machine
2. Use a steady surface work surface for your machine.
3. Make sure the work is clamped down, making sure there are no vibrations when cutting.
4. Make sure the work the area is well lubricated with WD40.
5. Always use Z pitch correctly ensuring that you never cut more than 0.3mm at a time, so when cutting 1.2mm make sure the machine passes 4 times at 0.3mm down to 1.2mm.

Browse by Topic